Philips AJ3231/79 - Manual (Page 3)

Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers, register your product at
www.philips.com/welcome.
English
CONTROLS
1 ALARM 1, ALARM 2
– RADIO activates the radio for alarm 1 or alarm 2
– BUZ activates the buzzer for alarm 1 or alarm 2
– OFF switches off the alarm 1 or alarm 2
2 Clock control
- SET TIME : sets the clock time
- CLOCK: to run on clock time
- SET AL 1: sets the alarm time for alarm 1
- SET AL 2: sets the alarm time for alarm 2
3 UP / DOWN: adjusts the hours/ minutes for the clock and alarm times
4 DISPLAY - show the clock/ alarm times and status of the set
5 Battery door - opens to store a 9 volt 6F22 type battery (not included) for
clock memory backup
6 VOL - adjusts the sound level
7 Frequency indicator - shows the radio frequency of your selected waveband
8 BAND (MW/FM/AUX) - select MW/FM waveband or switch to the AUX source
9 TUNING - tunes to radio stations
0 REPEAT ALARM (SLEEP OFF)
- switches off the active alarm for a 6-7 minute period
- switches off the radio sleep function
! SLEEP - activates the radio for sleep function
- adjusts the sleep period
@ ALARM RESET - stops the active alarm for 24 hours
# RADIO ON/OFF - switches the radio on/off
$ BRIGHTNESS - changes the brightness of the display illumination
% Mains lead - for AC mains supply
^ Pigtail aerial - improves FM reception
& AUX - connects external audio source.