Panasonic KX-TH102-C - Manual (Page 16)

Preparation
16 For assistance, please visit http://www.panasonic.com/phonehelp
Setting up the handset
Connecting the AC adaptor
L
Use only the included Panasonic AC
adaptor PQLV203.
Battery installation
Insert the battery ( A), and press it down
until it snaps into the compartment ( B).
Then close the handset cover.
Battery charge
Place the handset on the charger for 4
hours before initial use.
While charging, the CHARGE indicator on
the charger lights. When the battery is fully
charged, “Charge completed” is
displayed.
Note:
L If you want to use the handset
immediately, charge the battery for at
least 15 minutes.
L
To ensure that the battery charges
properly, clean the charge contacts of
the handset and charger with a soft, dry
cloth once a month. Clean more often if
the unit is subject to grease, dust, or
high humidity.
Battery strength
Note:
L
When the battery needs to be charged,
the handset beeps intermittently while it
is in use.
(120 V AC,
60 Hz)
A
B
Battery icon Battery strength
1 Fully charged or high
2 Medium
3 Low
Flashing: needs to be
recharged.
4 Discharged
TH102-C.book Page 16 Monday, March 13, 2006 2:41 PM