Task 005: installing the circuit packs, Step procedure – Paradyne BitStorm IP DSLAM 1900 User Manual
Page 64
2. BitStorm 1900 Installation and Testing
2-48
BitStorm 1900 Installation and Maintenance Guide
1900-A2-GN20-00
Task 005: Installing the Circuit Packs
Use this procedure to install the BitStorm 1900 circuit packs.
Requirements
This procedure requires the following:
•
Grounded anti-static protection
Step
Procedure
1.)
Place anti-static strip on wrist and attach to the grounded rack.
2.)
Remove the circuit pack from the anti-static packaging.
3.)
Align the card in the appropriate slot.
4.)
Seat the card by pressing firmly into place.
STOP
<RX KDYH FRPSOHWHG WKLV WDVN
WARNING: ESD (ELECTROSTATIC DISCHARGE) ! Anti-
static protection required! When handling
any circuit pack, you must wear grounded
anti-static protection. The discharge of static
electricity can damage the circuit packs.