Panasonic KX-F580 - Manual (Page 34)

34
Remote fax receiving
1 When a call is received, lift the handset of the
extension phone.
2 When:
—document reception is required,
—a slow beep is heard, or
—no sound is heard,
enter the remote fax activation code FIRMLY.
If you have an extension phone connected to your facsimile unit or on the same line, it is possible to receive a
fax message. Using the extension phone, dial the remote fax activation code.
This saves you from going to the facsimile unit and pressing
. START/COPY/SET
Important:
To activate this feature, use a touch tone telephone as the extension phone and enter the remote fax
activation code FIRMLY.
The remote activation code is set to “ ” as a pre-selected setting.
Receiving using an extension
3 Hang up the handset.
The facsimile unit is activated for reception.
Changing the remote fax activation code
This code can be from 2 to 4 digits in length using numbers 0 through 9 and the character .
2 3
4 5 6
7 8 9
0
1
1 Press . MENU
2 Press , then . 1 4
5 Press . START/COPY/SET
SYSTEM SET UP
REMOTE FAX ACT.
CODE=
6 Enter the new code number.
7 Press . START/COPY/SET
8 Press . MENU
Note:
Some special telephone company services
will require you to press a service access
code. If you subscribe to such services,
whole or part of the remote fax activation
code must be different from the service
access code.
If the remote fax activation code is set to
“0000”, the unit does not work properly.
Extension phone
To the EXT jack
or the same line
Dial keypad
(using an extension to receive a fax message)
3 Press . START/COPY/SET
4 Press or to select the desired setting.
If this feature is not required, select “OFF” .
MODE=ON
START/COPY/SET
MENU