Help commands, System configuration commands, Help commands system configuration commands – Patton electronic 3088 User Manual
Page 20
20
Help Commands
The following commands are provided to help the user find the
correct command:
•
help:
Lists all the commands that the console recognizes.
•
system help:
Lists all the commands that start with system that the
console recognizes.
•
system set help:
Lists all the commands that start with system set
that the console recognizes.
•
system show help:
Lists all the commands that start with system
show that the console recognizes.
•
dsl help:
Lists all the commands that start with dsl that the
console recognizes.
•
dsl set help:
Lists all the commands that start with dsl set that the
console recognizes.
•
dsl show help:
Lists all the commands that start with dsl show that
the console recognizes.
•
dsl show errcntr help:
Lists all the commands that start with dsl show
errcntr that the console recognizes.
System Configuration Commands
The following commands allow the user to configure the system:
•
system set password <password>:
Sets the system password.
•
system set circuitid <circuitid>:
Sets the circuit ID.
•
system set timeslots <1–72>:
Sets the number of DSL timeslots. The
data rate is calculated by 64K x timeslots.