Controls and their functions – Panasonic AJ-D400 User Manual
Page 17
– 17 –
°
ECU REMOTE (remote control) connector (6-pin)
Connect the AQ-EC1 extension control unit (option) here.
|
Note
{
The POWER switches on unit and extension control unit must be set to OFF before the re-
mote control cable is connected or disconnected.
±
26-pin output adaptor (option) mount
(See page 90 for mounting method.)
The 26-pin/12-pin output adaptor AJ-YA900P (option) or 26-pin output adaptor AJ-YA700P
(option) is mounted on this section. When the portable VTR is connected as the external
VTR, recording can be performed simultaneously with the unit’s built-in VTR.
Furthermore, in case of AJ-YA900P, by connecting the SHAN-C12TCA multi-connector cable
(optional accessory) to the 12-pin connector, it is possible to output the sound of audio chan-
nels 1 and 2 separately.
²
VIDEO OUT connector (BNC)
This outputs the video signals (75
°
termination, rated level) to be monitored. During record-
ing, EE images can be monitored; during playback, playback images can be monitored.
While performing settings on the menu, the setting menu can be superimposed onto the shot
images appearing on the monitor screen so that the settings can be checked (in which case,
the images appear in black and white).
³
CAM OUT (camera output) connector (BNC)
This outputs the composite video signals (75
°
termination, rated level). When a video moni-
tor is connected, the images shot by the camera can be monitored. Even while the VTR is
playing back, the camera’s images are output at all times.
≤
±
≥
Controls and Their Functions