Auto power save settings – Polaroid PDC 5350 User Manual

Page 14

Advertising
background image

14

Polaroid PDC 5350 Digital Camera User Guide

www.polaroid-digital.com

15

Polaroid PDC 5350 Digital Camera User Guide
www.polaroid-digital.com

• Auto Power Save Settings

The camera performs the following power save operations to conserve

battery power.

1 to 10 minute(s): The camera is designed to switch off automatically

to save battery life after one/two/three/four/five/six/

seven/eight/nine/ten minute(s) of inactivity.

Off:

The power save function is not activated.

You can change the Power save setting according to the following steps:

1. Turn on the camera by sliding and holding the Power Switch in the

arrow direction shown near the switch for 2 seconds.

2. Set the camera in Auto mode.

Press

Press

MENU

Power Save

Off

Setup Menu

1 Min

Press

MENU

,

then

Press

or

Setup Menu

On
NTSC

Off

Standard

On
NTSC
Standard

On
NTSC
Standard

This setting is also available in A/S/M, Video and Playback modes.

NOTE:

Auto power off is automatically disabled under any one of the following

conditions.

• While a slide show is playing.

• While the camera’s USB port is connected to a computer or other external

devices, or while the camera is being controlled by an external device.

• While the AC adaptor is connected to the camera.

Advertising