Paxar TC6021OH - Manual (Page 51)

Checking the Label Chute for Stuck Labels
Hold the printer in an upright position. Slide the latch buttons
(Figure 10) on each side of the printer to the rear with one
quick release action. The platen carrier will
partially open.
1. Slide the buttons to the rear again, the platen carrier will
open completely.
2. Remove any stuck labels.
3. Press both sides of the platen carrier closed.
Platen
Carrier
Label
Chute
Latch
Buttons
Figure 10
5. Care and Maintenance
43