Panasonic DMP-BDT300 - Manual (Page 33)

33
VQT2T11
S
e
tt
ings
Network Easy Setting(> 14)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings.
Remote Control
Change the remote control code if other Panasonic products
react to this remote control.
Quick Start
Speed of startup from standby mode is increased.
≥ Internal control unit will be powered when it is set to “On” so
compared to when the setting is“Off” the following will occur.
– Idle power consumption will increase. (about the power
consumption> 42)
– The cooling fan may turn slowly to prevent overheating of
internal parts.
Easy Setting
You can execute basic settings (“On-Screen Language”, “TV
Aspect”, “Analog Audio Output”, “Quick Start”)
Default Settings
This returns all values in the Setup menu and the Playback
menu, except for “Remote Control”, “On-Screen Language”,
“IP Address / DNS Settings”, “Proxy Server Settings”, “Lock”,
“DVD-Video Ratings” and “BD-Video Ratings” to the default
settings.
DivX Registration (> 21)
You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content.
System Information
Display firmware version of this unit and wireless LAN module
of your Wireless LAN Adaptor.
Firmware Update (> 16)
Press [OK] to show the following settings.
Network
\For\the\United\Kingdom,\Continental\Europe\and\Republic\of\Ireland\
LAN Connection Mode
Select connection method.
\For\the\United\Kingdom,\Continental\Europe\and\Republic\of\Ireland\
Access Point Connection Setting
This allows the Wireless router (Access point) and
connection settings to be set and the current connection
settings and connection state to be checked when a
wireless connection is used.
Connection Setting
The Wireless router (Access point) connection wizard will
be displayed.
Double Speed Mode Setting (2.4GHz)
When a 2.4 GHz wireless format is used, this setting sets
the connection speed.
≥ If you connect using the “Double Speed Mode
(40MHz)”, two channels use the same frequency band,
and there is consequently a greater risk of reception
interference. This can cause the connection speed to
drop or the connection to become unstable.
IP Address / DNS Settings
This is for checking the state of the network connection and
setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥ “Connection Speed Setting” is enabled only when
“Connection Speed Auto-Config” is turned “Off”.
Proxy Server Settings
This is for checking the state of connection with the Proxy
server and performing settings.
Press [OK] to show the respective setting.
Internet Content Settings (> 24) (VIERA CAST)
Press [OK] to show the following settings.
Lock
You can restrict the usage of VIERA CAST.
≥ Follow the on-screen instructions. Enter the 4-digit password
with the number buttons when the password screen is shown.
Audio Auto Gain Control
Volume that is different depending on the contents is adjusted
automatically to the standard volume while using the VIERA CAST.
≥ Depending on contents, this function effect will not work.
≥ Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit’s
time to match your location.
≥ Some VIERA CAST contents require the time zone to
be set. Set the time zone if necessary.
Summer Time
≥ Select “On” when using Daylight Saving time.
MAC Address
Displays the MAC address of this unit.
General
Automatic Update Check
When this equipment remains connected to the Internet, it
will check for the latest firmware version when it is turned on
and you can update it if necessary.
Update Now
You can update the firmware manually if a firmware update
is available.
DMP-BDT300EG-VQT2T11 _eng.book 33 ページ ２０１０年３月３日 水曜日 午後６時３３分