Panasonic PT-LB75U - Manual (Page 33)

POSITION menu
E
NGLISH - 33
Settings
Q 16:9
The squeezed signal will be projected in 16:9 ratio.
Q S4:3
The input signal will be sized down 75 % and
projected. S4:3 mode is effective when projecting
4:3 image on to a 16:9 screen.
Q THROUGH
The image will be projected without any size
adjustment.
Q AUTO
The signal which contains an identifying signal will
be detected and automatically project the image in
proper ratio.
If the projected image is degraded, you can activate
FRAME LOCK for synchronisation. Press I H to select
the required option. (Available with signals of RGB only)
OFF Deactive
ON Active
NOTE:
• WIDE MODE in OPTION menu should be ON when
projecting WIDE signals.
• If you project an image with an unmatched aspect ratio,
the image may distort or some portions may be
cropped. Select an aspect ratio which preserves the
intention of the image creator.
• The order of ASPECT types is defined not only by the
input method but also by the input signals. See “List of
compatible signals” on page 44.
• If you project a copyrighted image enlarged or distorted
by using ASPECT function in commercial use in a
public place, such as a restaurant or hotel, you might
infringe on the copyright of the creator which is
protected by copyright law.
FRAME LOCK