Panduit PTR3E - Manual (Page 35)

Normal Mode
The printer initially powers on in the ONLINE mode. The user can access the User
Settings using the following procedures:
Display lists the current ROM version of the printer
during the initialization process.
The LCD will display the ONLINE status on the top
line and the bottom line will contain the label quantity
(QTY) status. The message will be changed to OFFLINE
whenever the printer is switched offline by pressing the
LINE key. As soon as a print job is received, the quantity
line will indicated the number of labels to be printed. As
the label job begins to print, the display will indicate the
number of labels in the print job that remains to be
printed.
Press the LINE key once. When the display changes to
OFFLINE, press the FEED and LINE keys
simultaneously for more than one second.
The LCD now displays the Print Darkness selections.
The current setting is indicated by an underline cursor
under one of the range settings.
1. Press the LINE key to step the cursor to the desired
setting.
2. Once the correct setting is underlined, press the
FEED key to accept the selection and step the
display to the next adjustment.
The print speed selections are dependent upon the
printer setting of DSW2-8. The current setting is
indicated by the underlined cursor.
1. Press the LINE key to step the cursor to the
desired setting.
2. Once the correct setting is underlined, press the
FEED key to accept the selection and step the
display to the next adjustment.
DSW2-8 OFF DSW2-8 ON
2 ips 2 ips
4 ips 4 ips
6 ips 6 ips
8 ips 8 ips
10 ips 10 ips
27
Section 3. Configuration
INITIALIZING
ROM V00.00.00
ONLINE
QTY:000000
OFFLINE
000000
PRINT DARKNESS
1 2 3 4 5
PRINT SPEED
2 4 6 8 10