Niles Audio IR-KIT - Manual (Page 6)

4
PACKAGE CONTENTS
■
IR-CB2 x 1
■
Snap and Lock Connectors x 2
■
In-line power supply x 1
■
Self-adhesive rubber feet x 4
■
IR-SMR Receiver x 1
■
Adhesive-backed strip for mounting x 1
■
IR-E1 Emitters x 5
■
IR Blocking Covers x 5
■
Extra emitter adhesive strips x 10
PREPARING FOR INSTALLATION
The IR Receiver cables, emitter cables and the 12V
DC power supply cable must all reach the proposed
location of the IR-CB2 Connecting Block. Mark the
cables with wire labels, describing where the cables
originate from, rather than where they will terminate.
Locate a local un-switched AC outlet to be used to
power the IR-CB2 power supply.
Tools Required
■
1/8" Slotted screwdriver
■
Wire labels
■
Wire stripper