Network Instruments WAN Probe Kit - Manual (Page 24)

18 Updating the WAN and 10/100 Drivers
8. Choose “Install one of the other drivers” and click Next. The wizard shows a list of
drivers to pick from:
9. Choose “Network Instruments Intel 21143 Based Adapter Driver” and click Next.
After installing the device driver, the wizard displays an information dialog telling
you that the driver was successfully installed. Click Finish to complete the driver
installation.
WAN and 10/100 Driver Installation: Windows XP
When you reboot after installing the NICs, Windows XP will find drivers in its own
library that it reports as matching. These drivers will not work correctly with Probe and
Observer software: You must manually update the driver for each card, using the drivers
supplied on the Network Instruments Application CD.
Follow the instructions in the section below to install the driver for each card.