NETGEAR 108 MBPS WIRELESS WGT624 V3 - Manual (Page 18)

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
2-4 Introduction
202-10090-02 v 1.4, July 2005
• IP Address Sharing by NAT
The WGT624 v3 wireless router allows several networked PCs to share an Internet account
using only a single IP address, which may be statically or dynamically assigned by your
Internet service provider (ISP). This technique, known as NAT, allows the use of an
inexpensive single-user ISP account.
• Automatic Configuration of Attached PCs by DHCP
The WGT624 v3 wireless router dynamically assigns network configuration information,
including IP, gateway, and domain name server (DNS) addresses, to attached PCs on the LAN
using the Dynamic Host Configuration Protocol (DHCP). This feature greatly simplifies
configuration of PCs on your local network.
• DNS Proxy
When DHCP is enabled and no DNS addresses are specified, the router provides its own
address as a DNS server to the attached PCs. The router obtains actual DNS addresses from
the ISP during connection setup and forwards DNS requests from the LAN.
• PPP over Ethernet (PPPoE)
PPPoE is a protocol for connecting remote hosts to the Internet over a DSL connection by
simulating a dial-up connection. This feature eliminates the need to run a login program such
as Entersys or WinPOET on your PC.
Easy Installation and Management
You can install, configure, and operate the WGT624 v3 108 Mbps Wireless Firewall Router within
minutes after connecting it to the network. The following features simplify installation and
management tasks:
• Browser-based management
Browser-based configuration allows you to easily configure your router from almost any type
of personal computer, such as Windows, Macintosh, or Linux. A user-friendly Setup Wizard is
provided and online help documentation is built into the browser-based web Management
Interface.
• Smart Wizard
The WGT624 v3 wireless router Smart Wizard automatically senses the type of Internet
connection, asking you only for the information required for your type of ISP account.
• Firmware Auto-Update
The WGT624 v3 wireless router automatically checks the Internet to see if a newer version of
firmware is available. If so, it asks you if you want to install the upgrade. This lets you take
advantage of product enhancements for your WGT624 v3 as soon as they become available.