NETGEAR 108 MBPS WIRELESS WGT624 V3 - Manual (Page 25)

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
Configuring the Internet and Wireless Settings 3-3
202-10090-02 v 1.4, July 2005
If you want to change your Internet or wireless settings later, see “Changing Your
Configuration” on page 3-6 .
Logging Into Your Router
To log into your router after you have configured your router, do the following:
1. Type http://www.routerlogin.net in the address field of Internet Explorer or Netscape®
Navigator.
Figure 3-2: Log in to the router
2. When prompted, enter admin
for the router user name and
password for the router password,
both in lower case letters (or enter the password you chose if you changed it during the setup
in
“Initial Configuration” on page 3-2 ).
Note: The router user name and password are not the same as any user name or password you
may use to log in to your Internet connection.
A login window like the one shown below opens:
Figure 3-3: Login window