Clock set/adjustment, Rearview monitor (if so equipped), Twin trip odometer – NISSAN 2010 Altima Hybrid User Manual

Page 14

Advertising
background image

12

CLOCK SET/ADJUSTMENT

nAViGATiOn SYSTeM OnLY (if so equipped)

Press the SETTING button, and then select the
“clock” key to access the following clock settings:

On-screen clock – When this item is
turned to On, a clock is always displayed
in the upper right corner of the screen.
The clock is automatically adjusted by the
GPS system.

clock format – choose either the 12-hour clock display or the 24-hour clock display.

Offset (hour) – Adjust the time by increasing or decreasing the hour.

Offset (minute) – Adjust the time by increasing or decreasing the minutes.

daylight Savings Time – Turn this item to On for daylight savings time application.

Time Zone – choose the time zone.

REARVIEW MONITOR (if so equipped)

When the shift lever is moved to the R (ReVeRSe) position, the
monitor display will automatically change to show the area directly
behind the vehicle. The colored lines on the display screen indicate
approximate distances to objects.

Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft (2 m) and
10 ft (3 m).

TWIN TRIP ODOMETER

The twin trip odometer records the distance of individual
trips.

Press the button

01

to change the display as follows:

Trip A Trip B Trip A.

Press and hold the button

01

for more than 1 second to

reset the currently displayed trip odometer to zero.

01

Advertising
This manual is related to the following products: