NISSAN 2010 Altima Hybrid - Manual (Page 19)

17
PASSENGER REAR SEAT ENTRY (Coupe only)
fROM inSide THe VeHicLe
From the driver’s seat:
Pull the upper seatback release lever 01
, located on the inboard
side of the passenger front seat, to the uppermost position and
slide the seat forward.
From the back seat:
Step or push down on the lower seatback release lever 02
located
on the backside lower portion of the passenger seat and push the
seatback, sliding it forward.
fROM OuTSide THe VeHicLe
From the driver’s side:
Pull the upper seatback release lever 01
, located on the outboard
side of the driver’s front seat. (Return the seatback manually by
pushing the seatback rearward.)
From the passenger side:
Pull the seatback release lever 02
up until the seatback releases,
then push the seatback, sliding it forward. (Return the seatback
manually by pushing the seatback rearward.)
01
02
01
02
With power seats (if so equipped):
The control lever
01
allows you to make the
following adjustments:
Move the control lever
01
forward or
backward to adjust the seat forward
or backward.
Pull up or press down on the front of the
control lever
A
to raise or lower the front
portion of the driver’s seat cushion.
Pull up or press down on the rear of the
control lever
B
to raise or lower the rear
portion of the driver’s seat cushion.
RecLininG
Push the reclining switch 02
forward to move
the seatback forward; pull it back to move the seatback backward.
LuMBAR SuPPORT (driver’s seat, if so equipped)
Push or pull the adjusting lever 03
repeatedly to adjust the manual lumbar support.
Push the lumbar switch 03
to adjust the power lumbar support.
01
A B
02
03
Coupe
03 02
B A
01
Sedan