NISSAN 2010 Altima Hybrid - Manual (Page 6)

4
HEADLIGHT AND TURN SIGNAL CONTROL
TO AcTiVATe THe AuTOLiGHT SYSTeM
(if so equipped):
Turn the headlight control switch 01
to the AuTO position to
activate the autolight system. The autolight system can:
Turn the headlights on automatically when it is dark.
Turn the headlights off automatically when it is light.
keep the headlights on for 45 seconds after you turn the ignition switch to Off and all doors
are closed.
TO deAcTiVATe THe AuTOLiGHT SYSTeM:
Turn the headlight control switch 01
to the Off,
or position.
HeAdLiGHT cOnTROL SWiTcH
Turn the headlight control switch 01
to the
position to turn on the front parking, tail,
license plate and instrument panel lights.
Turn the headlight control switch 01
to the position to turn on the headlights. All other
lights remain on.
fOG LiGHT OPeRATiOn (if so equipped)
nOTe: The headlights must be on and the low beams selected for the fog lights to operate.
Turn the switch (inside collar)
02
to the position to turn on the fog lights.
Turn the switch (inside collar) 02
to the Off position to turn off the fog lights.
HiGH BeAM
Push the headlight control switch forward A
to select
the high beam function. The blue indicator light in the
instrument panel will illuminate. Pull the headlight switch
back to the original position to select the low beam. The
blue
indicator light will go out.
Pull and release the headlight control switch B
to flash
the headlight high beams on and off.
01 02
A
B