Figure 2. installing an ni pci-78xx r device – National Instruments NI 78xxR User Manual
Page 3
© National Instruments Corporation
3
Getting Started with R Series Intelligent DAQ
Figure 2.
Installing an NI PCI-78xxR Device
Figure 3.
Installing an NI PXI-78xxR Device in a PXI Chassis
5.
For the NI PCI-78xxR, secure the device mounting bracket to the computer back panel rail. For the
NI PXI-78xxR, secure the device front panel to the chassis front panel mounting rail using the
front-panel mounting screws.
6.
For the NI PCI-78xxR, replace the computer cover, if applicable.
7.
Plug in and power on the computer or PXI chassis.
To confirm that your device is recognized, complete the following additional steps:
1.
Double-click the Measurement & Automation icon on the desktop to open Measurement &
Automation Explorer (MAX).
2.
Expand Devices and Interfaces.
3.
Verify that the device appears under Devices and Interfaces»RIO Devices.
1
NI PCI-78xxR Device
3
PCI System Slot
3
PC with PCI Slot
1
PXI Chassis
2
PXI System Controller
3
NI PXI-78xxR Device
4
Injector/Ejector Handle
5
Front-Panel Mounting Screws
6
Module Guides
7
Power Switch
3
1
2
3
2
4
PXI-1000B
7
5
6
1