NISSAN 2009 Cube - Manual (Page 17)

FRONT SEAT ADJUSTMENTS
Ⅲ Pull up on the lever under the front of the
seat and slide forward or backward. Release
the lever to lock the seat in position.
Ⅲ Pull up the lever
on the side of the seat to
adjust your seatback forward or backward. Re-
lease the lever when you have found a comfort-
able angle and the seat belt fits properly.
SEAT LIFTER (driver’s seat)
Ⅲ Pull up or push down the adjusting lever
repeatedly to adjust the seat height.
REAR SEAT ADJUSTMENTS (if so equipped)
ADJUSTING THE REAR BENCH SEAT
Ⅲ Pull up on the lever
under the front of the seat
and slide forward or backward. The seat will slide in
3 fixed positions. Release the lever to lock the seat
in position.
Ⅲ To recline the seatback, pull the strap and lean
back. To bring the seatback forward, pull the strap
and lean forward. Release the strap to lock the seatback in position.
FOLDING DOWN THE REAR BENCH
SEAT
Ⅲ To fold the seats flat, secure the seat belts on the
seat belt hooks on the side wall. Release the
connector tongue of the rear center seat belt
from the buckle, and store the connector and
seat belt tongues on the seat belt hook.
Ⅲ Before folding down the seatback, tuck the seat belt buckles into the seat cushion
pockets.
Ⅲ Fold the seatback down by pulling the adjusting strap .
Ⅲ To raise the seatback, lift up each seatback and push it to the upright position until it is
latched.
Ⅲ After raising the seatback, pull the seat belt buckles out of the seat cushion pockets until
they are fully extended before using the seat belts.
15