An escape plan – Napco Security Technologies Alert 800 User Manual

Page 14

Advertising
background image

an escape plan

Even with the most advanced

fire alarm system, adequate pro-
tection requires an escape plan.
To prepare your plan:

Draw floorplans of your build-

ing (see sample). Show two
exits: a front or back door and
a window from each room. (Make
sure the window works. You may

need a special fire escape ladder
if the window is high up.) Write

your outside meeting

Rehearse: (1) Everyone in

their room with the doors closed.

(2) One person sounds the alarm.
(3) Each person tests his door.
(4) Pretend the door is hot and

use the alternate escape exit.

(5) Everyone meet outdoors at

the assigned spot.

Discuss these escape procedures

with those who use the building.
(1) If the premises is a residence,

sleep with the bedroom door closed.
A closed door will hold back deadly
smoke while you escape.
(2) When the fire alarm signals, escape
quickly. Do not stop to pack
(3) Test the door. If it is hot, use your

alternate route through the window.

If the door is cool, brace your shoulder
against it and open it cautiously. Be

ready to slam the door if smoke or
heat rush in. Crawl through smoke,
holding your breath. Close the doors
again on leaving to help prevent the

‘fire from spreading.

(4) Go to your specific outdoor meeting

so you can see that everyone

IS

(5) Assign someone to make sure

nobody returns to the burning building.

Call the fire department from a

neighbors telephone.

14

Advertising
This manual is related to the following products: