NETGEAR FS518T User Manual
Page 13
introduction 1-5
• Minimum latency of packet transmission (leading edge to leading edge) less than
80 µs
• Easy Plug and Play installation with no software to configure, saving time and
minimizing the potential for configuration errors
• Protocol independence and compatibility with all common protocols, such as
TCP/IP, NetWare, DECnet, and Microsoft Networks
• Normal/Uplink push button to simplify network extension to 10/100 segments
• Connection to a hub, using a simple, straight-through cable
• Auto MDI/MDIX on Gigabit ports, requiring no Normal/Uplink switch on the
two Gigabit ports
• Conformity to standards:
– IEEE 802.3 10BASE-T standard
– IEEE 802.3u 100BASE-TX standard
– IEEE 802.3ab 1000BASE-T standard
– IEEE 802.3x flow control
• Rack Mount Kit provided for installing the switch in a standard 19-inch equip-
ment rack, or for mounting on the wall
FS518T.Manual.FINAL 5/19/00 12:55 PM Page 13