NETGEAR FS518T - Manual (Page 17)

physical description 2-4
LEDs
The LEDs on the front panel of the switch and two vista LEDs on each RJ-45
connector allow you to identify the following information:
• Status of the power supply
• For each 10/100 Ethernet port:
– Network link at 10 Mbps or 100 Mbps
– Data transmission or receive activity
– Collision occurrence when in half-duplex mode or full-duplex mode
• For the 100/1000 Gigabit Ethernet port:
– Network link of 100 Mbps or 1000 Mbps
– Data transmission or receive activity at 100 Mbps or 1000 Mbps
– Collision occurrence when in half-duplex mode or full-duplex mode at
100 Mbps or 1000 Mbps
FS518T.Manual.FINAL 5/19/00 12:55 PM Page 18