Eizo T960 - Manual (Page 12)

12
1 INSTALLATION
D-Sub
mini 15 pin
D-Sub
mini 15 pin
MD-C87 (enclosed)
Standard PC graphics board
1-1 Connecting the Monitor to the PC
1) Be sure that the power switches of both the PC and the monitor are
OFF.
2) Plug the signal cable into the connector at the rear of the monitor.
• When connecting the signal cable or cable adapter, first check that
the shape at the cable side matches the shape at the connecting
side. After connecting, secure the connection with the screw-in
fasteners.
3) Plug the other end of the cable into the video connector on the rear of
the PC. Refer to the figures below.
Standard PC graphics board
Using the monitor with Windows ® 95/98
A monitor information file is saved in the EIZO FlexScan CRT
Utility Disk included in the package. It includes all the required
information for best operation with Windows 95/98.
Please install the enclosed utility and select your model name from
the monitor list in Windows 95/98.
For installation procedure, please read the readme.txt file in the
utilily disk.
1 INSTALLATION