Eizo T960 - Manual (Page 52)

52
6 SPECIFICATIONS
6 SPECIFICATIONS
Electrical Specifications
CRT 55 cm (21 inch) class, 90° deflection Aperture Grille type
CRT with Anti-Reflective SuperErgoCoat
®
CRT AG Pitch 0.25 mm (center), 0.27 mm (edges)
Scan Frequency
Horizontal: 30 kHz-115 kHz (Automatic)
Vertical: 50 Hz-160 Hz (Automatic)
Max. Active Display Area 400 mm (H) × 298 mm (V) (15.7” (H) × 11.7” (V))
(Viewable image size: 498 mm (19.6”))
* Display size can be set by the user through microprocessor
control panel.
* The actual size displayed can be dependent on the graphics
board or PC utilized.
Power Supply 100-120/220-240 VAC±10%, 50/60 Hz, 2.0/1.0 A
Power Consumption
Normal/Max: 160 W/200 W* (*with EIZO optional speaker & USB attached)
PowerManager Mode 1: Less than 15 W*
PowerManager Mode 2: Less than 3 W* (* When the USB hub is not connected)
Input Connector D-Sub mini 15-pin and BNC × 5 (switchable)
Recommended Resolution 1600 dots × 1200 lines
Input Signal
Sync: • H/V Separate, TTL, Positive/Negative
• H/V Composite, TTL, Positive/Negative
• Sync on Green 0.3 Vp-p, Negative
Video: • Analog 0.7 Vp-p/75
Ω
, Positive
Plug & Play VESA DDC1/2B
Mechanical Specifications
Dimensions 494 mm (W) × 486 mm (H) × 520 mm (D)
(19.4” (W) × 19.1” (H) × 20.5” (D))
Weight 33.0 kg (72.7 lbs.)
USB Specifications
USB standard Rev. 1.0 complied self-powered hub
USB Monitor Control ClassRev. 1.0 complied
Standard
Downstream power supply 500 mA for each (Max.)
Communication speed
12 Mbps (full), 1.5 Mbps (low)
USB ports Upstream port x 1, Downstream ports x 4
Environmental Specifications
Temperature operating: 0°C to 40°C (32 °F to 104 °F)
storage: -20°C to 60°C (-20 °F to 140 °F)
Humidity 30% to 80% R.H. Non-condensing
Certifications and Standards
100-120 VAC range UL/C-UL, FCC-B, DHHS, TÜV Rheinland/Ergonomics
Approved, TCO’99, EPA Energy Star
® Program
220-240 VAC range CE, CB, TÜV Rheinland/GS, TÜV Rheinland/Ergonomics
Approved, TCO’99, EPA Energy Star
® Program