Eizo T960 - Manual (Page 39)

39
2 ADJUSTMENTS & SETTINGS USING THE SCREENMANAGER
E
To Delay Entering the “Off Timer Mode”
To delay entering the “Off Timer Mode”, press any keys on the front
panel located to the left of the power switch during the
“Advance notice Mode”. The monitor will continue to operate for an
additional 90 minutes. There will be another advance notice for 15
minutes as described. Delayed entrance into the “Off Timer Mode” can
be extended as many times as desired.
(Example)
Reset
Use this function to return all ScreenManager parameters (size, position,
geometry, color, PowerManager, etc.) to their factory default settings.
Default settings are as follows.
Screen • Contrast/Brightness: 100 %/50 %
• Moiré: OFF
Color • Standard/9,300 K
PowerManager • VESA DPMS/5 sec.
Others • Input Priority: D-Sub
• Beep: ON
• Signal Filter 1: Mode 1
• Signal Filter 2: 100 %
• Off Timer: Disable
Language • English
(1) LED Solid Green
(2) LED Flashing Green
2 Beeps every 15
seconds
(3) LED Flashing Yellow
Switch the
power on
Advance
Notice End of
“On Period” Press any keys on
the front/Switch the
Power off and then
on
Advance
Notice
12 hrs. 12 hrs. 90 min.
15 min. 15 min.
Advance
Notice
mode
Advance
Notice
mode
Advance
Notice
mode
Power Off
On period
Off Timer
Mode
Press the
any keys on
the front
End of
“On Period” Advance
Notice