Lifebreath 2500EFD - Manual (Page 10)

10
Mounting the 2500
2500EFD
Roof mount
NOTE: Roof curb is one inch smaller than outside
dimensions of cabinet
Roof curb
2500IFD
Platform mount (not provided)
Mount unit on wooden or metal support
assembly. Unit must be raised an adequate height
for installation and slope of drain lines.
Vibration isolators
May be anchored to floor,
leaving space for drain connections.
2500IFD
Saddle mount (not provided)
Hang unit with threaded rods and U channel members.
2 X 4 under unit and
on top of hanging bracket
to prevent weight of unit from
being put on lip of cabinet
Threaded rods
U channels
Lip
* NOTE: When installing your
Lifebreath® HRV, flexible
duct connectors should be
installed between the HRV
and the galvanized ductwork