NISSAN 2010 Sentra - Manual (Page 17)

15
if the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.
Some commands are not available while the vehicle is in motion.
The “Help” command can be used in any menu to hear a list of available commands.
Please refer to the cellular phone manufacturer Owner’s Manual for detailed information
regarding your Bluetooth
® phone.
For recommended phones and detailed instructions, please visit
www.nissanusa.com/bluetooth.
cOnnecTinG YOuR PHOne
To use the hands-free feature, you need to set up, or connect, the system to recognize your cellular
phone(s). five Bluetooth
® -enabled phones can be connected. After setup, the system automatically
connects with a connected phone when the ignition is in the Acc or On position, as long as the
phone is on and in the vehicle.
nOTe: Some cellular phones require the user to enable the automatic reconnection feature. Please
refer to the cellular phone manufacturer’s Owner’s Manual for Bluetooth
® setup information.
cOnnecTinG PROceduRe
nOTe: The vehicle must be stationary when connecting the phone.
1. Press the
button on the steering wheel and wait for the tone.
2. Say “connect Phone.”
3. Wait for the tone, then say “Add phone.”
4. initiate connecting from the phone.
The connecting procedure varies according to each cellular phone model. for detailed
connecting instructions and compatible phones, please visit
www.nissanusa.com/bluetooth.
When prompted for a Pin code, enter “1234” from the handset. (The Pin code is
assigned by niSSAn and cannot be changed.)
5. Say a name for the phone when the system asks you to provide one. You can give the phone
a name of your choice.
MAkinG A PHOne cALL
1. Press the
button.
2. After the tone, do one of the following:
Say “call” then [name]. for example, say “call” then “Michelle.”
Say “call Phone number.” After waiting for the tone, say [number]. for example, say “call
Phone number.” After waiting for the tone, say “123-456-7891.”
Say “Recent calls” then “Redial” to redial the previous phone number.
Say “call Phone number” then “Special number” to dial more than 10 digits or any special
characters.
You can say all the digits of a 7- or 10-digit phone number at one time.