NISSAN 2010 Sentra - Manual (Page 6)

WINDSHIELD WIPER/WASHER SWITCH
The ignition switch must be in the On position to activate
the windshield wipers.
Move the lever to the following positions to operate the
windshield wipers:
1A intermittent (INT) – front wipers operate
intermittently and can be further adjusted by
twisting the time control ring 1B .
02 Low Speed (LO) – continuous low-speed operation of front wipers.
03 High Speed (HI) – continuous high-speed operation of front wipers.
04 Mist (MIST) – Lift the lever up for one sweep of the front wipers.
Pull the lever toward you to activate front washer fluid and several sweeps of the wipers.
4
HEADLIGHT AND TURN SIGNAL CONTROL
HeAdLiGHT cOnTROL SWiTcH
Turn the headlight control switch 01 to the
position to turn on the front parking, tail, license plate
and instrument panel lights.
Turn the headlight control switch 01 to the position
to turn on the headlights. All other lights remain on.
fOG LiGHT OPeRATiOn (if so equipped)
nOTe: The headlights must be on and the low beams selected for the fog lights to operate.
Turn the switch (inside collar)
02 to the position to turn on the fog lights.
Turn the switch (inside collar) 02 to the OFF position to turn off the fog lights.
HiGH BeAM
Push the headlight control switch forward A to select
the high beam function. The blue indicator light in the
instrument panel will illuminate. Pull the headlight switch
back to the original position to select the low beam.
The blue indicator light goes off.
Pull and release the headlight control switch B to flash
the headlight high beams on and off.