NEC XP29 Xtra - Manual (Page 9)

9
7
8
Terminal Board
DIP SW REMOTE
EXT SPEAKERS
SPEAKERS MUST HAVE
MORE THAN 5WATT RATING
IMPEDANCE 8 OHM
AC IN
SPEAKER SELECT
RIGHT LEFT
75
HIGH
INT EXT
BNC
IN
IN
R L(MONO)
AUDIO
VIDEO 1
S
1 2 3 4 5 6 7 8
ON
75
HIGH
THROUGH
OUT
THROUGH
OUT
THROUGH
OUT
THROUGH
OUT
THROUGH
OUT
THROUGH
OUT
THROUGH
OUT
IN
RGB1 PC / EXT CTL
75
HIGH
BNC
IN
IN
R L(MONO)
AUDIO
VIDEO 2
S
IN
R
R/C R /P R G/Y/Y B/C B P B
IN
OUT
H/CS V
L(MONO) IN
75
HIGH
75
HIGH
RGB AUDIO RGB 2
F
E G
E VIDEO 2
VIDEO 2 IN (BNC type) .... Connect another VCR or laser disk player here to
display the video.
S-VIDEO 2 IN ..... Connect S-Video input from another external source like
a VCR.
THROUGH OUT (BNC type) ....... Connect to a second monitor’ s video input
to relay the video signal input at VIDEO 2 IN.
THROUGH OUT (S-VIDEO) ....... Connect to a second monitor’ s S-connector
input to relay the video signal input at S-VIDEO 2 IN.
75 Ω /HIGH Impedance Select Switch for BNC type .... Set to “75 Ω ” during
normal operation. In multiple connections using VIDEO 2 IN and
THROUGH OUT (BNC type) terminals, set to “HIGH” on all but the last
monitor. Set to “75 Ω ” on the last monitor only.
AUDIO R IN ..... This is your right channel audio input for stereo sound.
AUDIO L IN (MONO) ...... This is your left channel audio input for stereo
sound coming from video equipment or audio system. It also serves as the
mono audio input.
AUDIO R THROUGH OUT ..... Connect to a second monitor’ s right channel
audio input.
AUDIO L THROUGH OUT ..... Connect to a second monitor’ s left channel
audio input. Terminal Board(continued)
F RGB 1 (Mini D-Sub 15-pin)
RGB Input/Throughout ..... Attach either end of the RGB Cable to a computer,
and then attach the other end to Input terminal. You can then use Through
out terminal, if you wish, to output the computer signal to a monitor. (If you do
use a second monitor, turn the monitor switch to “on.”)
75 Ω /HIGH Impedance Select Switch .... This switch should be “75 Ω ” for
normal use without external termination or when your RGB signal should be
terminated with 75 Ω . Switch to the “HIGH” position when you have another
monitor attached to your RGB through-out connector.
G RGB AUDIO
AUDIO R IN .... This is where you connect RGB right audio output from a
computer or another RGB source.
AUDIO L IN(MONO) ... This is where you connect RGB left audio output from
a computer or another RGB source.
AUDIO R THROUGH OUT ...... Connect to a second monitor’ s RGB right audio
input.
AUDIO L THROUGH OUT ..... Connect to a second monitor’s RGB left audio
input.