NEC EXPRESS5800/100 SERIES N8100-1635F - Manual (Page 42)

3-8 Setting Up Your Modular Server
 IMPORTANT:
„ Keep the removed blank cover for future use.
„
Remove the blank cover from the target slot only.
3. Put the modular server on the clean, rigid and flat desk. Loosen the thumbscrew to open
the lock lever.
IMPORTANT: The modular server contains a hard disk drive that is
easily affected by the dust, water, shocks and vibrations. Take strict care
to handle it.
4. Hold firmly the frame of the modular server so that the surface to connect a hard disk
drive faces right and the card edge faces the Module Enclosure side.
IMPORTANT: Do not hold the lock lever. Doing so may cause the
modular server to fall down or be damaged due to deformed lock lever.
Lock lever