NEC EXPRESS5800/100 SERIES N8100-1635F - Manual (Page 72)

4-20 Configuring Your Modular Server
Console Redirection Submenu
Option Parameter Description Your Setting
BIOS Redirection
Port Shamrock-G
[Disabled]
Serial Port B Specify the serial port to which a
hardware console is connected.
Baud Rate 9600
[19.2k]
38.4K
57.6k
115.2k Specify the baud rate for the interface
with hardware consoles.
Flow Control None
XON/XOFF
[CTS/RTS]
CTS/RTS+CD Specify the flow control method.
Terminal Type PC ANSI
[VT100+]
VT-UTF8 Specify the type of remote console.
Continue
Redirection after
POST Disabled
[Enabled] Specify whether the console output
after completion of POST is enabled
or disabled.
Remote Console
Reset [Disabled]
Enabled Specify whether to enable or disable
resetting by Escape command (Esc R)
sent from the remote console.
[ ]: Factory-set