NEC EXPRESS5800/100 SERIES N8100-1635F - Manual (Page 68)

4-16 Configuring Your Modular Server
*1 One of the following messages appears when you press Enter.
In case of no password setting
Set Supervisor Password
Enter New Password [ ]
Confirm New Password [ ]
In case of any password stored
Set Supervisor Password
Enter Current Password [ ]
Enter New Password [ ]
Confirm New Password [ ]
If the input of "Enter New Password" is
different from the input of "Confirm New
Password", the following message is
displayed.
Setup Warning
Passwords do not match
Re-enter password
[Continue]
If the input of "Current Password" is
different from the stored password, the
following message is displayed.
Set Supervisor Password
Setup Warning
Invalid Password
[Continue]
If the input of "Current Password" failed
three times, the following message is
displayed.
System Disabled
If the Password setting succeeded, the
following message is displayed.
Setup Notice
Changes have been saved
[Continue]