Navigon 5100 - Manual (Page 23)

January 2008 NAVIGON 5100 User’s Guide 11
Revision 2.0 NAVIGON, INC.
Basic Operations
Starting the NAVIGON 5100
1. Press and hold the (On/Off/Standby) switch for at least 6 seconds.
If password protection has been activated, the E NTER PASSWORD WINDOW opens.
2. Enter the password.
3. Tap the
Continue button.
Each time the navigation device is turned on, the following message appears
when the software is started again:
4. After you have read and fully understood the text, tap OK .
Note: If you do not accept these instructions, tap Cancel to exit the navigation
software.
The M AIN WINDOW displays.
The Main Window
The M AIN WINDOW opens when the navigation software starts.
You can reach all of the navigation software functions from this window.