Navigon 5100 - Manual (Page 28)

Basic Operations
Viewing device statuses
16 NAVIGON 5100 User’s Guide January 2008
NAVIGON, INC. Revision 2.0
Viewing device statuses
Symbols located at the top of the screen are used to display information.
GPS
The GPS symbol can show the following GPS reception status:
No Symbol The built-in GPS receiver is not operational. Contact customer
service if the problem persists.
No Signal Data is being received from less than three satellites. Position
cannot be calculated.
GPS Ready Data is being received from at least three satellites. Position can
be calculated.
Power
The Power symbol can display the following conditions of the built-in battery:
The device is powered by an external power source. The battery is charging.
The device is powered by its internal battery. Battery is fully charged.
The device is powered by its internal battery. Battery charge is sufficient.
The device is powered by its internal battery. Battery charge is low.
Direction
The Direction symbol shows the direction you are currently heading. It can show the
following points of the compass: N, NE, E, SE, S, SW, W and NW.
For more information, see “About GPS navigation” on page 4.