Navigon 5100 - Manual (Page 69)

Working With Maps
Map in Preview mode
January 2008 NAVIGON 5100 User’s Guide 57
Revision 2.0 NAVIGON, INC.
Map in Preview mode
You have entered a destination and tapped the Start Navigation button.
- OR –
You have planned or loaded a route and tapped the Show Route button.
The map opens in Preview mode. The entire route is visible.
1. The route is highlighted in orange.
2. A triangle in orange shows your current position.
If you display a planned or loaded route and the specified starting point is not the
same as your current location, the current position may or may not be shown on
the preview.
3. The destination is marked with a small flag.
When you have planned or loaded a route and displayed it, the starting point and
each route point is marked with a small flag.
4. The total distance for the route is shown in a small information box, together with
the estimated trip time and the estimated time of arrival.
This information can be displayed or hidden by tapping on
Options > Settings >
Basic Settings .
If you display a route with several stages, information for each stage is shown.
5. Tap:
• The Show Turn-by-Turn button to view detailed directions for the route. (See
“Viewing a Turn-by-Turn List” on page 54.)
• The Start Navigation button to begin the journey.
When you display a planned or loaded route, the route may be recalculated.
Starting point for the calculation is your current location. Once the route is cal-
culated, you are guided to the first route point.
• Options > Route Profile to view or change the settings used to calculate the
route.
• ( Destination search ) to view the map in Destination search mode.