North Star M157305H User Manual

Page 7

Advertising
background image

7

II.) Assembly Instructions


A. 1. Carefully raise the pressure washer off the floor by

using blocks or ramps. Make sure the pressure
washer is secure before proceeding.

2. Install the two wheels as shown with grease zerk
away from frame.

3. Slide the two wheel retainers onto the end of the
axle. Tighten the setscrew with a hex wrench.

Description

Qty.

Wheel

2

Wheel Retainer

2








B. 1. Install the pressure hose onto the pressure washer

as shown.

2. Connect the other end of the pressure hose to the

spray gun as shown.

3. Make sure all plumbing connections are tight.

Description

Qty.

Spray Gun/ Lance

1

Spray Hose

1




























Wheel

Wheel Retainer

Wheel

Axle

Grease Zerk

Advertising
This manual is related to the following products: