Napco Security Technologies GEM-X255 User Manual
Page 24
24
P R O G R A M M I N G ( O P T I O N A L )
Enter the User Program Mode
1
Enter your User Code, then press
A
to enter the Function Mode.
2
Answer NO (press
F
)
until
“ACTIVATE PROGRAM Y/N” is displayed
,
then press YES
(
E
).
“ENTER USER CODE” will display, press NEXT
(
E
) and the keypad will display the Zone 1 Description.
Entering a new zone description
•
Use buttons
1
and
2
to position the cursor within the display.
•
Use buttons
3
and
6
to scroll through numbers, letters, punctuation
marks and a variety of symbols.
•
Use the above buttons to enter each character of the description and then press
D
to save when the zone description is complete.
To advance to the next zone (or to any other zone):
•
Move the cursor to the displayed zone number (i.e., “01”) using
1
and
2
.
•
Change the zone number using
3
and
6
, then move the cursor to the
first character of the description and program a description for the new zone.
•
Always press
D
to save each zone description.
Programming Zone Descriptions
The zone descriptions which appear on the keypad display may be programmed in the User Program Mode.
A C T I V A T E
P R O G R A M Y / N
0 0 1 - F R O N T D O O R
GEM-X255_OI273_USER.pub
page 24
Tuesday, September 10, 2002 13:14