Navigon POCKET LOOX N100 - Manual (Page 17)

Using your Pocket LOOX
Battery charging via a USB port
Battery USB
► Connect the USB cable to your Pocket LOOX.
► Connect the USB cable to the computer’s USB port.
The computer’s USB port must deliver no less than 500 mh of power.
Because of the low charging current, the charging process will take longer
than it does using the power adapter.
Optimizing battery life
Optimizing battery life
The maximum operating time depends on the different applications used as some consume more
energy than others.You can adjust system settings to help you to save energy when using your
Pocket LOOX. These settings enable you to use the battery operating time optimally.
In the default setting the Pocket LOOX goes into the Suspend mode after three
minutes when working without a power connection and no entries are made.
You can switch on the Pocket LOOX again at any time by briefly pressing the
Suspend/Resume button and then continue working where you left off.
Starting up your Pocket LOOX for the first time
Preparations for First start-up Stylus Pocket LOOX
2
1
► Press the Suspend/Resume button (1) to switch on the Pocket LOOX.
► Pull out the stylus (2) in the direction of the arrow.
Before using the Pocket LOOX, you must calibrate the screen (see
chapter
"Calibrating the screen", Page 28 ).
A26391-K197-Z126-1-7619, edition 1 9