Navigon POCKET LOOX N100 - Manual (Page 21)

Using your Pocket LOOX
Resetting the Pocket LOOX
Soft reset
After certain applications, it may be necessary to restart the Pocket LOOX with the soft reset.
Unsaved data will be lost. Shut down all programs before you restart the Pocket LOOX.
1
► Using the unscrewed end of the expandable stylus, push it once into the opening for a soft reset (1).
The warm boot is carried out.
Rebooting the Pocket LOOX
Factory default settings Hardware reset
If your Pocket LOOX locks up and switching it on and off with the Suspend/Resume button and
soft reset has no effect, you can reset your Pocket LOOX using a cold start.
Unsaved data will be lost. Shut down all programs before you reset the Pocket LOOX.
► Take the batteries out briefly, then put them back in.
► Then switch the Pocket LOOX on again
Using the stylus and screen
Stylus
The stylus is extendable.
► Extend the stylus.
► Tap the desired element on the screen once with the stylus to execute an action.
A26391-K197-Z126-1-7619, edition 1 13