Nortel Networks T7406E - Manual (Page 28)

28 Chapter 4 Configuring the handset settings
NN40110-110 NN40110-110
Setting the message LED
Complete this procedure to have the message LED flash when you receive a voice message, or to
turn off this option.
Turning the message LED on or off
1 In programming mode, scroll to the Message LED menu.
2 Press Select .
3 To turn the message LED on, scroll to the On option and press Select .
4 To turn the message LED on, scroll to the Off option and press Select .
Setting the duration of the backlight
Complete this procedure to set the length of time the backlight remains on after you have
completed a call or other action on the handset. The longer duration you select for the backlight,
the less talk time and standby time you have.
Setting the duration of the backlight
1 In programming mode, scroll Back Light .
2 Press Select .
3 Scroll through the duration options (shown in 10-second increments) to the length of time you
want the backlight to remain on.
4 Press Select .
Setting volume and tones
Complete the following procedures to
• turn key beeps on or off
• set the ring and vibration options
• select a ring type
• select a ring volume
• select a noisy location level
Setting key beeps
1 In programming mode, scroll to the key Beep menu.
2 Press Select .
3 Scroll to the On option to turn on key beeps.