Nostalgia Electrics MARGARITA OASIS MOS-400 - Manual (Page 10)

ENGLISH
8
Changing the Blade
Once blade becomes dull, it will need to be changed. You may also want to
periodically take apart the Ice Shaving Chamber to clean all of the parts inside.
To take the Blade out, follow these steps:
Press Brake Bar back and up toward the Ice Shaving Chamber. 1.
While holding the Brake Bar turn Spinner counterclockwise 2.
to unlock. Lift the Spinner to release.
Carefully press tabs of Blade Housing inward and lift up. 3.
Twist off Blade Cap to release the Blade. USE EXTREME 4.
CAUTION. BLADE IS VERY SHARP.
When replacing the Spinner, make sure to press the Brake Bar back and 5.
up toward the Ice Shaving Chamber while turning Spinner clockwise.
Spinner Blade Cap Blade Housing Blade