North Star MTBSL - Manual (Page 14)

Assembly (continued)
14
Step Ele ven: Install boom val ve to pump
Install the boom valve with (2) hose clamps and (1) 14” hose. Follow hose clamp installation
instructions below.
1. Attach one end of the 14” hose to the boom hose barb on the pump.
2. Attach the other end of the 14” hose to the boom valve.
Step Twel ve: Connect boom val ve to boom nozzles
Connect with (4) hose clamps, (1) 14” hose, and (1) 24” hose. Follow hose clamp installation
instructions below.
1. Attach one end of the 14” hose to the boom valve.
2. Attach the other end of the 14” hose to the right nozzle fitting.
3. Attach one end of the 24” hose to the boom valve.
4. Attach the other end of the 24” hose to the left nozzle fitting.
Boom valve
Hose clamp
14” Hose
Hose clamp
Boom hose barb
Hose clamp
24” Hose
Left nozzle fitting
14” Hose
Hose clamp
Right nozzle fitting
Hose clamp installation instructions
1. Slide hose clamp over the end of
the hose
2. Push the hose onto the hose barb
3. Slide the hose clamp over the hose
barb
4. Tighten the hose clamp