North Star MTBSL - Manual (Page 26)

Operation - Using the Sprayer (continued)
26
C HEM ICAL
), * 
7. Che ck drain
cap
Be fore filling tank, ensure drain cap is se curely tightene d.
8. Fill tank Add pesticide to tank through fill cap:
a) Confirm the chemical/water dilution ratios specified on the chemical label.
b) Determine chemical and water volumes needed for the planned application,
taking into consideration that maximum tank capacity is 16 gallons for
Item# 28517 and 26 gallons for Item# 28518.
Note: Only purchase and m ix as much chem ical as you need for the
planned application in order to m inim ize chem ical overapplication and
the need for storing unused chem icals.
c) Add chemical to the tank through the fill cap.
If the chem ical is not pre-m ixed, add water and pesticide concentrate in the
order prescribed on the label.
9. Ensure
chemical
mixe d
Ensure chemical is thoroughly mixe d in tank.
- Stirring device should be made of metal or plastic, non-chemical absorbing
material, and then properly cleaned and stored after use.
10. Re place fill
cap
Re place fill cap and tighten se curely.
Drain cap