Nortel Networks 1120E - Manual (Page 16)

16 Chapter 3 Configuring options
NN40050-104 NN40050-104
• Press the Select soft key to save the desired language and return to the Telephone Options
menu.
• Press the Cancel soft key to keep existing configurations.
5 Press the Exit soft key. Changes are saved automatically.
2. Local Diagnostics
1. IP Set&DHCP Information
The Network Configuration tool is used to view reports about IP set and DHCP operation. This
tool is for administrator use only.
2. Network Diagnostic Tools
The Network Diagnostic Tools menu contains tools that are used to diagnose network problems.
This menu is for administrator use only.
3. Ethernet statistics
The Ethernet statistics tool is used to view reports about Ethernet operation. This menu is for
administrator use only.
4. IP networks statistics
The IP networks statistics tool is used to view reports about network operation. This menu is for
administrator use only.
5. USB device information
The USB Devices tool provides information about any Universal Serial Bus (USB) devices that
you connect to your phone. Your IP Phone 1120E automatically detects USB devices when you
connect them to the USB port in the back of the telephone.
1 Double-press (Services) to open the Local Tools menu.
2 Press the 5 key on the telephone dialpad to select 5. USB Devices.
USB Device information is displayed.
3 Press the Return soft key.