Answering a call, While on an active call, Placing a call on hold – Nortel Networks 1120E User Manual
Page 22: Using handsfree, Using a headset, Muting the microphone
22
Chapter 4 Telephone setup
NN40050-104
NN40050-104
Answering a call
When your telephone rings and the light flashes, or when an intercom or line soft key indicator
flashes:
•
Lift the handset.
OR
•
Press the line or intercom soft key with the flashing
S
indicator before you lift the handset.
While on an active call
Placing a call on hold
Calls are put on hold automatically when you switch from one line to another.
•
While on a call, press
(Hold). The
S
indicator for the line on hold flashes.
•
To retrieve a held call, tap the line soft key with the flashing
S
indicator.
Using handsfree
Handsfree is not available on all phones. Contact your administrator to find our if this feature is
available for your use.
•
Press
(Handsfree) to make or answer a call.
•
To switch to handsfree when you are on a handset call, press
(Handsfree)
and replace
the handset. Lift the handset to switch back.
•
To switch to handsfree when you are on a headset call, press
(Handsfree)
Press
(Headset)
to switch back.
Using a headset
You must have a headset installed on your telephone to use this feature.
•
Press
(Headset) to activate the headset mode. When the
(Headset) light is on,
press a line or intercom soft key to make a call.
•
To switch to your headset when you are on a handset call, press
(Headset) and replace
the handset. Lift the handset to switch back.
•
To switch to your headset when you are on a Handsfree call, press
(Headset). Press
(Handsfree) to switch back.
Muting the Microphone
You can use
(Mute) on handset, handsfree, or headset calls.