NDC comm Instant Wave - Manual (Page 9)

How to Use this Guide
InstantWave High Rate is extremely versatile in providing varying levels of
network management. For Small Office/Home Office users, setup and
configuration is a quick, four-step process. The Access Point Hardware
Installation section, on page 9, provides simple instructions to get your network up
and running within minutes. Go to the Access Point Hardware Installation section
if your network will meet the following criteria:
• You will accept all default values
• Your network will have only one Access Point
The AP COMFig Tool, see page 12, permits AP configuration from a PC via a
COM port connection. The program enables the user to change the default Access
Point IP configuration settings before introducing a new AP to an already
established wireless network.
Before using the setup tool, you should read through the next section “Planning
Your Network”, in order to get the best possible performance from your
InstantWave High Rate wireless network.
InstantWave High Rate Access Point 3