Nikon LT170 - Manual (Page 19)

E-19
Selecting a Source
Selecting the computer or video source
Press any one of the COMPUTER, VIDEO or
S-VIDEO buttons.
Press and quickly release the SOURCE button on the projector cabinet
to display the Source list. Each time the SOURCE button is pressed,
each source name will be highlighted in sequence. Highlighting a source
name will display an hour glass icon in one second. After that the input
signal will be selected.
PROJECTING AN IMAGE (BASIC OPERATION)
OFF
COMPUTER
AUTO ADJ.
PC-MUTE MAGNIFY
P0WER ON
VIDEO
AUTO
MENU
HELP
MUTE
PICTURE
FREEZE
CANCEL
ASPECT
COMP. S-VIDEO
ENTER
Adjustable Tilt Foot Button Adjustable Tilt Foot
NOTE: You can rotate the Fine Adjustment rings of both tilt feet on the left and
right sides of the cabinet front for fine adjustment of the tilt feet.
Adjusting the Picture Size and Position
Place your projector on a flat level surface and ensure that the projector
is square to the screen.
Lift the front edge of the projector to center the image vertically.
* If the projected image does not appear square to the screen then use
the Keystone feature for proper adjustment. See page E-20.
Move the projector left to center the image horizontally on the screen.
Adjust the Tilt Foot
1. Lift the front part of the projector.
Push and hold the PUSH symbol of the Adjustable Tilt Foot button on
the front top of the projector to extend the adjustable tilt feet up to a
maximum height.
ZO OM
FO CU S
LA MP ME NU
SOU RCE EN TE R
ST AT US PO WE R
ON /S TA ND B Y
SE LE CT
CO MPUTER
S-VIDEO IN
AU DIO IN
VID EO IN
PU SH
CLOS E
1
3
2
ZO OM
FO CU S
LA MP ME NU
SOURCE EN TE R
ST AT US PO WE R
ON /ST AN D B Y
SE LE CT
CO MP UT ER
S- VID EO IN
AU DI O I N
VID EO IN
PU SH
CLOS E
4
Using the cabinet buttons
NOTE: If no input signal is available, the projector will display a blue background
(factory preset).
LAMP
STATUS
POWER
ON/STAND BY
SELECT
MENU
SOURCE
ENTER
Using the Remote Control
2. Lower the front of the projector to the desired height (max. 40mm/1.6”)
and release the Adjustable Tilt Foot Button to lock the Adjustable tilt
foot. There is approximately 10 degrees of up and down adjustment
for the front of the projector.
CAUTION:
Do not use the tilt-foot for purposes other than originally intended.
Misuses such as gripping the tilt-foot or hanging on the wall can
cause damage to the projector.