Optimizing rgb picture automatically, Turning up or down volume, E-21 – Nikon LT170 User Manual

Page 21: Projecting an image (basic operation), Adjusting the image using auto adjust, Increase volume decrease volume

Advertising
background image

E-21

PROJECTING AN IMAGE (BASIC OPERATION)

Optimizing RGB Picture Automatically

Adjusting the Image Using Auto Adjust

Optimizing RGB image automatically.

Using the cabinet buttons

1. Press the MENU button .

The Basic menu will be displayed. Make sure that “Auto Adjust Ex-
ecuted” is selected.

LAMP

STATUS

POWER

ON/STAND BY

SELECT

MENU

SOURCE

ENTER

OFF

COMPUTER

AUTO ADJ.

P0WER

ON

VIDEO

AUTO

MENU

CANCEL

ASPECT

COMP.

S-VIDEO

ENTER

LAMP

STATUS

POWER

ON/STAND BY

SELECT

MENU

SOURCE

ENTER

2. Press the ENTER button to optimize an RGB image automatically.

The Hour Glass icon will appear. It takes some seconds to optimize an
RGB image.

Using the remote control
Press the AUTO ADJ. button

The Hour Glass icon will appear. It takes some
seconds to optimize an RGB image.

This function adjusts the clock frequencies that eliminate the horizontal
banding in the image. This function also adjusts the clock phase to re-
duce video noise, dot interference or cross talk. (This is evident when
part of your image appears to be shimmering.)
This adjustment may be necessary when you connect your computer for
the first time.

NOTE:
• Some signals may not be displayed correctly or take time.
• The Auto Adjust function does not work for component and video signal.
• If the Auto Adjust operation cannot optimize the RGB signal, try to adjust Clock

and Phase manually. See page E-32.

Turning Up or Down Volume

Sound level from the speaker on the projector can be adjusted when the
menu is not displayed.

increase volume

decrease volume

OFF

COMPUTER

AUTO ADJ.

P0WER

ON

VIDEO

AUTO

MENU

CANCEL

ASPECT

COMP.

S-VIDEO

ENTER

LAMP

STATUS

POWER

ON/STAND BY

SELECT

MENU

SOURCE

ENTER

increase volume

decrease volume

Advertising