Nokia 2865 ES - Manual (Page 41)

C o n t a c t s
40
■ Add new contacts
Save a name and number
1. Enter the phone number you wish to save.
2. Select Save .
3. Enter the name, and select OK > Done .
When you enter a number, you can select Options > Insert pause ('p') to insert
a pause code or Options > Insert wait ('w') to insert a wait code. See "Insert
dialing codes," p. 40, for more information.
Save a number (only)
Enter the phone number you wish to save, and select and hold Options .
Save a contact
1. Select Menu > Contacts > Names > Options > Add new .
2. Enter the name, and select OK .
3. Enter the phone number, and select OK .
Insert dialing codes
Insert special characters called dialing codes into phone numbers such as voice
mail, and save the number to a
1-touch dialing location. Dialing codes instruct
the receiving system to pause, wait, bypass, or accept the numbers that follow
them in the dialing string.
Automate voice mail with dialing codes. For more information, see "Automate
voice mail," p. 34.
Press * repeatedly to cycle through dialing codes. When the desired code is
displayed, pause briefly, and the code is inserted into the dialing string.
The following dialing codes are available:
Dialing code Function
* Bypasses a set of instructions.
+ Causes the international access code to be replaced by +.
p Pauses for 2.5 seconds before sending any numbers that follow.
w Waits for you to press the call key before sending the numbers
or codes that follow.